6011 welding rod is a kind of welding rod that can be used to weld low carbon steel, galvanized steel, stainless steel and aluminum. It is a kind of low alloyed stainless steel welding rod with a melting point of 1,100°C (2,010°F). The tensile strength and yield strength are between 50-55MPa (7-8Kgf/mm2) and 28-32MPa (4.3-5.1Kgf/mm2),
Aluminium is a very popular metal in the fabrication field. It is usually found in the form of a thin sheet or plate. Most fabrication shops will manufacture their own aluminium sheets, by rolling or extruding the metal through a rolling mill. It is also possible to purchase new aluminium sheets from a metal supply
Do you want to make a decent living and enjoy your work? If you are looking for a job that offers both stability and good pay, then you should consider becoming a pipe welder. Pipe welders and fitters work in the energy, water, manufacturing, aerospace, construction, and other industries. They work with large pipelines that
If you have a desire to become a welder, or are already a welder, you will need to join a trade union. Joining a trade union is an important step for any worker and essential if you are looking to work in the welding industry. The reason for this is that trade unions are responsible
If you’ve ever dealt with a welding project in the past, you’ll be well aware of the frustration when a substantial amount of spatter has, well, splatted all over your work. This frustration only multiplies when factoring in the time needed to remove the issue. The good news is there’s a solution, but what is anti-spatter spray exactly?
For most, the mention of AC/DC evokes memories of a certain rock band. For welders, it means comparing two different electric currents that are used during the welding process. There's just one question: What's the difference between AC and DC welding?
In the welding world, it is essential that you know how to identify between brass and bronze. Even though they share certain properties and may look the same, there are significant differences between the two metals.
For instance, if you purchase brass but actually required bronze for your project, this could pose a significant problem. Their differences mean that each one is only a suitable fit for certain applications.
Having an understanding of all the different welding types is key to becoming a welder that stands above the rest. One of the easiest welding types every welder should learn is the Plug or Rosette Weld. This is especially true for anyone wishing to go into the automotive manufacturing industry. But what exactly is a plug weld and how do you even make it?
Undercuts are one of the most common welding defects that every welder has to deal with from time to time. Undercutting leaves the welded area weak and prone to cracking. Fortunately, with proper welding techniques, undercuts can be minimized significantly. This is why it is essential to learn what causes undercut in welding so that effective prevention methods can be applied.
Welding is an important trade, and welders produce products that hold a lot of responsibility. If welding is not done right, the result can be catastrophic because parts can break, people can get injured, and reputations can be ruined. One common weakness in welded materials is porosity. This article answers the question: "what is porosity in welding," as well as the causes, how to prevent it, if it can be fixed, and the acceptable amount of porosity in a finished product.